Top 10 Best rockville amplifier 2 channel Reviews

Top 10 Rated rockville amplifier 2 channel in 2022 Comparison Table

Bestseller No. 1
Rockville dB25 2800 Watt/700w CEA RMS 2 Channel Amplifier Car Stereo Amp, Loud!!
  • Includes: Amplifier. Birth sheet with tested power. Owner’s manual. Mounting Screws. Warranty.
  • Rockville dB25 2800Watt/1400Watt RMS Class AB 2 Ohm Car Stereo Amplifier With Optical Coupler Technology. CEA Compliant Power Ratings (Rated at less than 1 % distortion) (Use these CEA ratings when matching and comparing with other CEA compliant brands such as Kicker, Rockford Fosgate, etc). 2 Ohm: 350 Watts x 2 Channel <1% THD+N . 4 Ohm: 230 Watts x 2 Channel <1% THD+N. 4 Ohm: Bridged: 700 Watts x 1 Channel.
  • RMS Power Ratings: (Use these RMS ratings when comparing with great brands such as Hifonics, Earthquake, Soundstream, etc). 2 Ohm: 700 Watts x 2 Channel. 4 Ohm: 460 Watts x 2 Channel. 4 Ohm:Bridged: 1400 Watts x 1 Channel. Peak: (The amount of power the amplifier can produce for a split second at the loudest part of a song. 2 Ohm: 1400 Watts x 1 Channel. 4 Ohm 920 Watts x 1 Channel. 4 Ohm:Bridged: 2800 Watts x 1 Channel.
  • High-Speed MOSFET Power Supply. Under Voltage Protection at 10V. Over Voltage Protection at 16V. Tertiary Supplies Circuitry. Studio-Grade Bipolar Output Stage Transistors. Fully Adjustable 12dB / Octave Crossover with Differential Circuitry. Low Pass Filter: 50Hz - 250Hz. High Pass Filter: 60Hz -1.2KHz. Full IC-Controlled Protection Circuitry. Fully Adjustable 12dB Bass Equalizer.
  • Mute and Delay Soft Start System. RCA Line Output. 8 Volt Preamp Circuitry. Status Mode LED Indicator. Minimum THD at Rated Power: < 0.05%. S / N Ratio: >90dB. Frequency Response: 10Hz - 100KHz. Damping Factor: >100 @ 100Hz. 30 Amp x3ATC Fuse. Dimensions: (W x H x L) 9˝ x 2.4˝ x 19.4˝.
Bestseller No. 2
Rockville 3000 Watt Peak / 800w RMS 2 Channel Power Amplifier Pro/DJ Amp (RPA9)
  • Rockville RPA9 3000 Watt peak 2 channel professional/DJ rack mount amplifier. 2U rack space
  • Bridged and stereo output switch makes this perfect for (2) subwoofer, (2) speakers, or (4) speakers
  • Built in Crossover switch allows make this perfect for speakers, monitors, or subwoofers
  • Channel a & B clipping LED indicators. Channel a & B separate level controls
  • Power, Signal, overload, clipping, and protection LED indicators on front of amp
Bestseller No. 3
Rockville dB14 4000w Peak/1000w RMS Mono 2 Ohm Amplifier Car Audio Amp
  • Includes: Amplifier. Bass Remote. Birth sheet with tested power. Owner’s manual. Mounting Screws. Warranty.
  • Rockville dB14 4000 Watt Peak/1000 Watt Dyno-Certified RMS Mono 2 Ohm Amplifier Car Audio Amp. Dyno Certified RMS Power Ratings: (Certified Dyno Test / Less than 1 % THD) (Use these ratings when comparing with top brands such as Kicker, Rockford Fosgate, etc). - 2 Ohm: 1000 Watts x 1 Channel <1% THD+N. - 4 Ohm: 600 Watts x 1 Channel <1% THD+N.
  • Peak: (Use these ratings when comparing with the top budget brands such as Boss, Power Acoustik, etc). - 2 Ohm: 4000 Watts x 1 Channel. - 4 Ohm: 2400 Watts x 1 Channel. High-Speed MOSFET Power Supply. Optical Coupler Class “D” Technology. Fully Adjustable 12dB / Octave Crossover with Differential Circuitry. Low Pass Filter: 50Hz - 250Hz.
  • Subsonic Filter: 15Hz - 55Hz. Phase Control Switch. Full IC-Controlled Protection Circuitry. Remote Dashboard Subwoofer Control. Fully Adjustable 12dB Bass Equalizer. Mute and Delay Soft Start System. RCA Preamp Line Output. 8 Volt Preamp Circuitry. Status Mode LED Indicator. Minimum THD at Rated Power: <0.1%. S / N Ratio: >90dB. Under Voltage Protection at 10V. Over Voltage Protection at 16V.
  • Frequency Response: 15Hz - 250Hz. Damping Factor: >150 @ 100Hz. 100 Amp Maxi Fuse. Dimensions: (W x H x L) 9" x 2.4" x 15.5"
SaleBestseller No. 4
Rockville RVT-1 1000w Peak/250w Dyno-Certified RMS 2 Channel Car Amplifier Stereo Amp
  • Rockville RVT-1 1000w Peak/250w Dyno-Certified RMS 2 Channel Car Amplifier Stereo Amp.
  • 2 Ohm: 125 Watts x 2 Channel <1% THD+N. 4 Ohm: 95 Watts x 2 Channel <1% THD+N. 4 Ohms bridged: 250 Watts x 1 Channel <1% THD+N.
  • High-Speed MOSFET Power Supply. Fully Adjustable 6dB / Octave Crossover with Differential Circuitry. Low Pass Filter: 50Hz - 200Hz.
  • High Pass Filter: 50Hz-1.2KHz. Full IC-Controlled Protection Circuitry. Fully Adjustable 12dB Bass Equalizer. Mute and Delay Soft Start System. Status Mode LED Indicator.
  • Over Voltage Protection at 16V, FrequeTHD at Rated Power: <1%. S/N Ratio: >90dB. Under Voltage Protection at 9V. Over Voltage Protection at 16V. Frequency Response: 10Hz – 20KHz. Damping Factor: >150 @ 100Hz. Fuse: 35A x 1. Dimensions: (L x W x H) 11" x 8.5" x 2.24". Weight: 5.3 lbsncy Response: 10Hz – 20KHz, Damping Factor: >150 @ 100Hz, Fuse: 35A x 1, Dimensions: (L x W x H) 11" x 8.5" x 2.24", Weight: 5.3 lbs
Bestseller No. 5
Rockville RPA16 10000 Watt Peak / 3000w RMS 2 Channel Power Amplifier Pro/DJ Amp
  • Features of RPA16: Rockville RPA16 10, 000 Watt Peak 2 Channel Professional/DJ Rack Mount Amplifier, LCD displays volume in dB per channel and operating temperature, 2U rack space, Built in limiter protects your speakers from distortion and clipping, Bridged mode allows you to combine both channels power into one channel for use with a subwoofer, Stereo mode is perfect for (2) speakers or (4) speakers in a left and right configuration.
  • Parallel mode gives you dual mono output signal which is perfect for monitor use when you want all sounds coming out of each speaker instead of a left/right configuration, Built in crossover switch (bypass, 80 Hz, 160 Hz) allows amp to be used with full range PA speakers, or Subwoofer(s), Channel A & B Clipping Led Indicators, Channel A & B Separate Level Controls, Power, signal, clipping, and protection LED indicators on front of amp, Heavy duty rack mount ears with handles.
  • Built-in variable high velocity quiet cooling fans, Maximum headroom for 4-ohm and 8-ohm Speakers, Level controls for precise setting and matching of sensitivity, Computer controlled IC protection circuitry against speaker short circuit, thermal over load, DC over load, User serviceable fuse (25A, 250V), Frequency Response (bandwidth @ 2Vrms out, @ -3. 0dB) 10 Hz – 30 Khz, THD + Noise @ 1Khz full power: <0. 04%, Input Impedance: 10K Ohm Balanced, Input signal voltage: 660mV – 1. 5V.
  • Input sensitivity: 0. 7v, Damping factor: ( 100Hz, 10w, 4 ohms): 36. 5, Damping factor: (1Khz @ 8 ohm): >400: 1, Effective damping factor (100Hz, 10w, 4 Ohms) 1. 08, Output impedance at speaker terminals: 0. 10975 Ohms, Frequency Response vs THD+N (worst case, across normal bandwidth 1W) 0. 6%, Signal to Noise Ratio: > 100dB, IMD 60Hz & 1kHz, 4: 1: <0. 04%, SLEW RATE (input filter limited) : 40v/uS, Power Requirements: 120V / 50-60Hz, Weight: 40. 8 lbs, Dimensions: 19. 09 x 16. 93 x 3. 35 inch.
  • Power Ratings of RPA16: RMS Power Output: Stereo 8 Ohm: 2 x 1000W, Stereo 4 Ohm: 2 x 1500W, Bridged 8 Ohm: 1 x 3000W. Peak Power Output: Stereo 4 Ohm: 2 x 5000W Max, Bridged 8 Ohm: 1 x 10000W Max.
Bestseller No. 6
Rockville RXA-T1 1500 Watt Peak/375w RMS 2 Channel Car Stereo Amplifier+Amp Kit
  • Package Includes: (1) Rockville RXA-T1 1500 Watt Peak/375w RMS 2 Channel Amplifier Car Stereo Amp.(1) Rockville RWK81 8 Gauge Complete Amp Installation Wire Kit with 100 % Copper RCA
  • Features of RXA-T1: Rockville RXA-T1 1500 Watt Peak/370 Watt Dyno-Certified RMS 2 Channel Amplifier Car Stereo Amp.Dyno Certified RMS Power Ratings: (Certified Dyno Test / Less than 1 % THD) (Use these ratings when comparing with top brands such as Kicker, Rockford Fosgate, etc): 250 Watts (2 x 125 Watts) at 4 ohms and 1% THD+N.370 Watts (2 x 185 Watts) at 2 ohms < 1% THD.1 x 370 Watts bridged @ 4 Ohms < 1% THD.
  • Peak: (Use these ratings when comparing with the top budget brands such as Boss, Power Acoustik, etc).1500 Watts (2 x 750 @ 2 ohms or 1 x 1500 @ 4 Ohms).High-Speed MOSFET Power Supply.Studio-Grade Bipolar Output Stage Transistors.Fully Adjustable 12dB / Octave Crossover.Low Pass Filter: 50Hz - 250Hz.High Pass Filter: 15Hz - 250Hz.Fully Adjustable 12dB Bass Equalizer with Differential Circuitry.2-Ohm Stable Stereo.4-Ohm Mono Bridgeable.
  • Features of RWK81: Rockville RWK81 8 Gauge 2 Channel Car Amplifier Wiring Installation Kit.(1) 17' High Grade Twisted Pair of 100% Copper RCA Cable.17' 8 Gauge Translucent Blue Super Flex Power Cables.17' 18 Gauge Blue Remote Cable.17' 16 Gauge Clear Speaker Wire.3' 8 Gauge Super Flex Ground Wire.Gold Plated AGU Heat Resistant Fuse Holder.60 Amp AGU Gold Plated Fuse.
  • 7' Split Tube Loom.Accessories Included: Wire Ties, Ring Terminals, Butt Connectors, Spades, and Grommets.Soft abrasion proof insulating jacket allows for 100% improved flexibility.PVC outer jacket can with-stand an extreme temperature range of -40 to 220 degrees F
Bestseller No. 7
Rockville Krypton-T2 2800 Watt Peak/700w RMS 2 Channel Amplifier Car Amp
  • Rockville KRYPTON-T2 2800 Watt Peak/700w Dyno-Certified RMS 2 Channel Amplifier Car Amp.
  • Dyno Certified RMS Power Ratings: (Certified Dyno Test / Less than 1 % THD) (Use these ratings when comparing with top brands such as Kicker, Rockford Fosgate, etc).
  • 2 Ohm: 350 Watts x 2 Channel 0.28% THD+N. 4 Ohm 215 Watts x 2 Channel 0.04% THD+N. 4 Ohm: Bridged: 700 Watts x 1 Channel <1% THD+N.
  • Peak: (Use these ratings when comparing with the top budget brands such as Boss, Power Acoustik, etc). 2 Ohm: 1400 Watts x 2 Channels. 4 Ohm: 860 Watts x 2 Channels.
  • 4 Ohm Bridged: 2800 Watts x 1 Channel. Digital Voltage Display on Amp. High Level Input (Auto ON). High-Speed MOSFET Power Supply. Fully Adjustable 12dB / Octave Crossover with Differential Circuitry. Low Pass Filter: 50Hz - 250Hz
Bestseller No. 8
Rockville RXM-T1 1500 Watt Peak Marine/Boat 2 Channel Amplifier Stereo Amp
  • Rockville RXM-T1 1500w Peak / 370w Dyno-Certified RMS Marine/Boat 2 Channel Amplifier Stereo Amp.
  • Dyno Certified RMS Power Ratings: (Certified Dyno Test / Less than 1 % THD) (Use these ratings when comparing with top brands such as Kicker, Rockford Fosgate, etc). 250 Watts (2 x 125 Watts) at 4 ohms and 1% THD+N. 370 Watts (2 x 185 Watts) at 2 ohms < 1% THD. 1 x 370 Watts bridged @ 4 Ohms < 1% THD.
  • Peak: (Use these ratings when comparing with the top budget brands such as Boss, Power Acoustik, etc). 1500 Watts (2 x 750 @ 2 ohms or 1 x 1500 @ 4 Ohms). High-Speed MOSFET Power Supply. Studio-Grade Bipolar Output Stage Transistors. Fully Adjustable 12dB / Octave Crossover. Low Pass Filter : 50Hz - 250Hz. High Pass Filter : 15Hz - 250Hz. Fully Adjustable 12dB Bass Equalizer with Differential Circuitry. 2-Ohm Stable Stereo. 4-Ohm Mono Bridgeable.
  • Mute and Delay Soft Start System. Full IC-Controlled Protection Circuitry. RCA Preamp Line Output. ELNA Brand Audiophile Capacitors. 8 Volt Preamp Circuitry. Status Mode LED Indicator. High Level Input with Smart Auto Turn-On. Minimum THD at Rated Power: < 0.05%.
  • Frequency Response : 10Hz - 40KHz. Damping Factor : > 200 @ 100Hz. 50 Amp Maxi Fuse. Dimensions : (W x H x L) 8.6" x 2" x 13"
Bestseller No. 9
Rockville RXD-T2 Micro Car Amplifier 2400w 2 Channel 2x600W Rated+Amp Kit
  • Package Includes: (1) Rockville RXD-T2 2400 Watt Peak 2 Channel Micro Class D Water Resistant Car Amplifier (2 x 600 Watts RMS Dyno-Certified). (1) Rockville RWK41 4 Gauge Complete Car Amp Wire Kit w/RCA's
  • Features of RMWK4: Rockville RMWK4 4 AWG Gauge Waterproof Marine/Boat Amplifier Wire Installation Kit. 20 ' Translucent, Twisted Pair, High Quality, Tinned-OFC Flexible PVC RCA Cable. 18' 4 Gauge High Current, Low Impedance, Clear Flexible Power Cable with 3' Black Poly Woven Mesh to better resist chemicals in the battery compartment.
  • 18' 4 Gauge High Current, Low Impedance, Light Blue, Flexible Ground Cable. 25' 16 Gauge 100% Tinned-CCA, White, Non-Transparent Resin PVC, Flat Speaker Cable. 25' Blue Remote Wire
  • Features of RXD-T2: Rockville RXD-T2 2400 Watt Peak 2 Channel Micro Class D Water Resistant Car Amplifier (2 x 600 Watts RMS Dyno-Certified ). Full-Range Class D Amplifier Architecture.
  • Dyno Certified RMS Power Ratings: (Certified Dyno Test / Less than 1 % THD) (Use these ratings when comparing with top brands such as Kicker, Rockford Fosgate, etc). 800 Watts (2 x 400 Watts) at 4 ohms and 1% THD+N. 1200 Watts (2 x 600 Watts) at 2 ohms < 1% THD. 1200 Watts (1 x 1200 Watts) bridged @ 4 Ohms < 1% THD
Bestseller No. 10
Rockville dB13 3000 Watt Peak/750w CEA rated RMS Mono 2 Ohm Amplifier+Amp Kit
  • Package Includes: (1) Rockville dB13 3000 Watt Peak/750w Dyno-Certified RMS Mono 2 Ohm Amplifier Car Amp. (1) Rockville RWK41 4 Gauge Complete Car Amp Wiring Installation Wire Kit w/RCA's. �
  • Features of RWK41: 1 - 17' High Grade Twisted Pair of 100% Copper RCA Cable. 17' - 4 Gauge Translucent Blue SuperFlex Power Cables.
  • 17' - 18 Gauge Blue Remote Cable. 17' - 16 Gauge Clear Speaker Wire
  • Features of dB13: Rockville dB13 3000 Watt Peak/750w Dyno-Certified RMS Mono 2 Ohm Amplifier Car Amp. Dyno Certified RMS Power Ratings: (Certified Dyno Test / Less than 1 % THD) (Use these ratings when comparing with top brands such as Kicker, Rockford Fosgate, etc).
  • 2 Ohm: 750 Watts x 1 Channel <1% THD+N. - 4 Ohm: 450 Watts x 1 Channel <1% THD+N. Peak: (Use these ratings when comparing with the top budget brands such as Boss, Power Acoustik, etc). - 2 Ohm: 3000 Watts x 1 Channel. - 4 Ohm: 1800 Watts x 1 Channel
Are you looking for top 10 great rockville amplifier 2 channel for your money in 2022? We had scanned more than 85,273 customer reviews about top 10 best rockville amplifier 2 channel in 2022. So, let’s take a closer look at the most popular brands currently available and find the top 10 rated rockville amplifier 2 channel in 2022 for you.

Our team of expert editors had spent more than 49 hours to research all new and top rated products on the market 2022, then we reviewed consumer feedbacks, and wrote this article.

We have ranked the best brands from AI and Big Data, please see below:

Our Best Choice: Rockville dB25 2800 Watt/700w RMS 2 Channel Car Amplifier+Amp Kit Loud!!


Our rating:4.6 out of 5 stars (4.6 / 5)





[ad_1] Capabilities of dB25: Rockville dB25 2800 Watt/700w Dyno-Certified RMS 2 Channel Amplifier Motor vehicle Stereo Amp, Loud!! Dyno Qualified RMS Energy Scores: (Qualified Dyno Test / Less than 1 % THD) (Use these rankings when comparing with leading models such as Kicker, Rockford Fosgate, and many others) – 2 Ohm: 350 Watts x 2 Channel <1% THD+N - 4 Ohm: 230 Watts x 2 Channel <1% THD+N - 4 Ohm Bridged: 700 Watts x 1 Channel Peak: (Use these ratings when comparing with the top budget brands such as Boss, Power Acoustik, etc) - 2 Ohm: 1400 Watts x 1 Channel - 4 Ohm: 920 Watts x 1 Channel - 4 Ohm Bridged: 2800 Watts x 1 Channel
Package Includes: (1) Rockville dB25 2800 Watt/700w Dyno-Certified RMS 2 Channel Amplifier Car Stereo Amp, Loud!!. (1) Rockville RWK41 4 Gauge Complete Wire Kit w/RCA’s
Features of RWK41: 1 – 17′ High Grade Twisted Pair of 100% Copper RCA Cable. 17′ – 4 Gauge Translucent Blue SuperFlex Power Cables.
17′ – 18 Gauge Blue Remote Cable. 17′ – 16 Gauge Clear Speaker Wire
Features of dB25: Rockville dB25 2800 Watt/700w Dyno-Certified RMS 2 Channel Amplifier Car Stereo Amp, Loud!!. Dyno Certified RMS Power Ratings: (Certified Dyno Test / Less than 1 % THD) (Use these ratings when comparing with top brands such as Kicker, Rockford Fosgate, etc).
2 Ohm: 350 Watts x 2 Channel <1% THD+N. - 4 Ohm: 230 Watts x 2 Channel <1% THD+N. - 4 Ohm Bridged: 700 Watts x 1 Channel. Peak: (Use these ratings when comparing with the top budget brands such as Boss, Power Acoustik, etc). - 2 Ohm: 1400 Watts x 1 Channel. - 4 Ohm: 920 Watts x 1 Channel. - 4 Ohm Bridged: 2800 Watts x 1 Channel

Leave a Comment